Hi All,
I'm brand new to the forum so thanks for letting me join; there seems to be a lot of good info here.
I started smoking cigars about 18 months ago and my favourites are the Monte Cristo Open Master, Partagas D4 and Bol?var.
Around 5 months ago I received a gift of a used Adorini Firenze (including two 69% Boveda packs and a Caliber IV hygrometer). When I received the humidor the hygrometer read 69% literally every time I checked it.
About 2 months ago I got some new 69% Boveda packs. Since then the humidity varies anywhere between 62% - 66% which I'm not pleased with. In order to rectify this I've tried rubbing down the timber with distilled water which changed things for a few days but then it dropped back down again.
I've also checked the hygrometer with a Boveda 75% calibration pack which showed the instrument was accurate. I've then use the hygrometer to check the 69% Boveda packs and they've shown up as being correct as well.
I've recently ordered an extra shelf insert and decided to get the Boveda 84% seasoning pack to got with it in the hope that it will change things.
My questions are:
(1) Am I correct in thinking that the humidity should be 68% - 71% so this situation needs correcting?
(2) Have you faced a similar situation before and what did you do to correct it?
Thanks for taking the time to read this. Any advice offered would be much appreciated. Hopefully over time I will become a contributing member to the forum.
Many thanks,
Alex
I'm brand new to the forum so thanks for letting me join; there seems to be a lot of good info here.
I started smoking cigars about 18 months ago and my favourites are the Monte Cristo Open Master, Partagas D4 and Bol?var.
Around 5 months ago I received a gift of a used Adorini Firenze (including two 69% Boveda packs and a Caliber IV hygrometer). When I received the humidor the hygrometer read 69% literally every time I checked it.
About 2 months ago I got some new 69% Boveda packs. Since then the humidity varies anywhere between 62% - 66% which I'm not pleased with. In order to rectify this I've tried rubbing down the timber with distilled water which changed things for a few days but then it dropped back down again.
I've also checked the hygrometer with a Boveda 75% calibration pack which showed the instrument was accurate. I've then use the hygrometer to check the 69% Boveda packs and they've shown up as being correct as well.
I've recently ordered an extra shelf insert and decided to get the Boveda 84% seasoning pack to got with it in the hope that it will change things.
My questions are:
(1) Am I correct in thinking that the humidity should be 68% - 71% so this situation needs correcting?
(2) Have you faced a similar situation before and what did you do to correct it?
Thanks for taking the time to read this. Any advice offered would be much appreciated. Hopefully over time I will become a contributing member to the forum.
Many thanks,
Alex
Comment